\begin
Discover why 18 million people worldwide trust Overleaf with their work.
\documentclass[12pt, a4paper, twoside, openright]{Thesis} % Paper size, default font size and one-sided paper
\usepackage[utf8]{inputenc}
\usepackage{wrapfig}
\usepackage{lscape}
\usepackage{rotating}
\usepackage{graphicx}
\usepackage{caption}
\usepackage{amsmath, nccmath}
\usepackage{comment}
\usepackage{afterpage}
\usepackage{multirow}
\usepackage{multicol}
\usepackage{cleveref}
\usepackage{rotating}
% \usepackage[font=small]{caption}
% \captionsetup{compatibility=false}
% \usepackage{subcaption}
% \usepackage{subfig}
\usepackage{makecell}
\usepackage{booktabs}
\usepackage{multirow}
\usepackage{lscape}
\usepackage{longtable}
\usepackage{placeins}
\usepackage{adjustbox}
\usepackage{arydshln} % dashed midline
\usepackage{ragged2e}
\usepackage{lipsum}
\usepackage{mathtools} % To use box inside an aligned environment
\usepackage{enumitem} % for roman letter lists
% \usepackage{subfig}
\newcommand\myemptypage{
\null
\thispagestyle{empty}
\addtocounter{page}{-1}
\newpage
}
%\usepackage[width=14cm, left=3cm]{geometry}
% prints author names as small caps
%\usepackage{subcaption} %incompatible with subfig
\graphicspath{{Pictures/}} % Specifies the directory where pictures are stored
\usepackage[authoryear]{natbib}
%\usepackage[square, numbers]{natbib} % Use the natbib reference package - read up on this to edit the reference style; if you want text (e.g. Smith et al., 2012) for the in-text references (instead of numbers), remove 'numbers' v
%\bibliographystyle{abbrvnat}
%\setcitestyle{authoryear,open={((},close={))}}
\hypersetup{urlcolor=blue, colorlinks=true} % Colors hyperlinks in blue - change to black if annoyingv`
\title{\ttitle} % Defines the thesis title - don't touch this
%%%% New added
\usepackage{tikz}
\usetikzlibrary{shapes.geometric, arrows}
% Defining Tickz Style
\tikzstyle{startstop} = [rectangle, rounded corners, minimum width=3cm, minimum height=1cm, text centered, text width = 10cm, draw=black, fill=white]
% \tikzstyle{startstop1} = [rectangle, rounded corners, minimum width=3cm, minimum height=1cm, text centered, draw=black, fill=white, text width = 10cm]
% \tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, text width = 4.5cm, draw=black, fill=blue!30]
\tikzstyle{process} = [rectangle, minimum width=3cm, minimum height=1cm, text centered, text width = 6cm, draw=black, fill=white, text width = 10cm]
% \tikzstyle{decision} = [diamond, minimum width=3cm, minimum height=1cm, text centered, draw=black, fill=green!30]
\tikzstyle{arrow} = [ultra thick,->,>=stealth, line width=0.7mm]
\usepackage[T1]{fontenc}
\begin{document}
% \makeatletter
% \renewcommand*{\NAT@nmfmt}[1]{\textsc{#1}}
% \makeatother
% prints author names as small caps
% it is sometimes necessary in user documents to have access to such package-internal macros, and so the commands \makeatletter and \makeatother change the catcode
\frontmatter % Use roman page numbering style (i, ii, iii, iv...) for the pre-content pages
\setstretch{1.6} % Line spacing of 1.6 (double line spacing)
% Define the page headers using the FancyHdr package and set up for one-sided printing
\fancyhead{} % Clears all page headers and footers
\rhead{\thepage} % Sets the right side header to show the page number
\lhead{} % Clears the left side page header
\pagestyle{fancy} % Finally, use the "fancy" page style to implement the FancyHdr headers
\newcommand{\HRule}{\rule{\linewidth}{0.5mm}} % New command to make the lines in the title page
% PDF meta-data
\hypersetup{pdftitle={\ttitle}}
\hypersetup{pdfsubject=\subjectname}
\hypersetup{pdfauthor=\authornames}
\hypersetup{pdfkeywords=\keywordnames}
% --------------------------------------------------
%----------------------------------------------------------------------------------------
% TITLE PAGE
%----------------------------------------------------------------------------------------
\begin{comment}
\begin{titlepage}
\begin{center}
\HRule \\[0.4cm] % Horizontal line
{\huge \bfseries \ttitle}\\[0.4cm] % Thesis title
\HRule \\[1.5cm] % Horizontal line
\large \textit{A thesis submitted in fulfillment of the requirements\\ for the degree of \degreename}\\[0.3cm] % University requirement text
\textit{by}\\[0.4cm]
%\href{http://home.nitk.ac.in/~saiwal}{\authornames}
\vfill
\graphicspath{ {./Figures/} }
\begin{figure}[hb]
\centering
\includegraphics[width=0.4\linewidth]{Images/redlogo.png}
\end{figure}
\DEPTNAME\\ % Research group name and department name
\textsc{ \UNIVNAME}\\[1.5cm] % University name
\large \today\\[2cm] % Date
\end{center}
\end{titlepage}
\end{comment}
%\begin{document}
%\begin{titlepage}
%\include{title1}
%\end{titlepage}
%\myemptypage
%\afterpage{\null\newpage}
%\include{blank_page_1}
%\newpage
%\newpage
\include{title}
\newpage
\myemptypage
%----------------------------------------------------------------------------------------
% DEDICATION
%----------------------------------------------------------------------------------------
%
\setstretch{1.3} % Return the line spacing back to 1.3
%
\pagestyle{empty} % Page style needs to be empty for this page
%
\dedicatory{\textit{Dedicated to my beloved parents.}} % Dedication text
%
\addtocontents{toc}{\vspace{2em}} % Add a gap in the Contents, for aesthetics
\newpage
%----------------------------------------------------------------------------------------
% Approval page
%----------------------------------------------------------------------------------------
\addtotoc{Approval}
{\addtocontents{toc}{}
\vspace{-1in}
%-------------------------------------------------------------
% DECLARATION PAGE
% Your institution may give you a different text to place here
%----------------------------------------------------------------------------------------
% ------------------------------------------------
% Professor's declaration
\clearpage % Start a new page
\myemptypage
% ------------------------------------------------
% Student declaration
\addtotoc{Declaration} % Add the "Scope for future work" page entry to the Contents
{\addtocontents{toc}{} % Add a gap in the Contents, for aesthetics
\centerline{\textbf{\LARGE {Declaration}}}}
\vspace{3em}
I declare that this written submission represents my ideas in my own words. Where others' ideas and words have been included, I have adequately cited and referenced the original source. I declare that I have adhered to all principles of academic honesty and integrity and have not misrepresented or fabricated, or falsified any idea/data/fact/source in my submission. I understand that any violation of the above will cause disciplinary action by the Institute and can also evoke penal action from the source which has thus not been properly cited or from whom proper permission has not been taken when needed.
\bigskip
\bigskip
\bigskip
\bigskip
\begin{flushleft}
\ldots \ldots \ldots \ldots \ldots \ldots \ldots \ldots \ldots\\
\vspace{2mm}
\textbf{Your Name} \\
Roll No.: 20xxxxxxx \\
Date: \\
Place: NIT Srinagar
\end{flushleft}
\clearpage % Start a new page
\myemptypage
%----------------------------------------------------------------------------------------
% ACKNOWLEDGEMENTS
%----------------------------------------------------------------------------------------
\setstretch{1.3} % Reset the line-spacing to 1.3 for body text (if it has changed)
\acknowledgements{\addtocontents{toc}{} % Add a gap in the Contents, for aesthetics
I take this opportunity to acknowledge and express my gratitude to all those who supported and guided me during the dissertation work. I am grateful to the Almighty for the abundant grace and blessings that enabled me to complete this dissertation successfully. \\
\begin{flushleft}
\textbf{Your Name}
\end{flushleft}
}
\clearpage % Start a new page
\myemptypage
%----------------------------------------------------------------------------------------
% ABSTRACT PAGE
%----------------------------------------------------------------------------------------
\addtotoc{Abstract} % Add the "Abstract" page entry to the Contents
\abstract{\addtocontents{toc}{} % Add a gap in the Contents, for aesthetics
\lipsum[1-2]
}
% \clearpage % Start a new page
% \myemptypage
%----------------------------------------------------------------------------------------
% LIST OF CONTENTS/FIGURES/TABLES PAGES
%----------------------------------------------------------------------------------------
\pagestyle{fancy} % The page style headers have been "empty" all this time, now use the "fancy" headers as defined before to bring them back
\lhead{\emph{Contents}} % Set the left side page header to "Contents"
\tableofcontents % Write out the Table of Contents
\lhead{\emph{List of Figures}} % Set the left side page header to "List of Figures"
\listoffigures % Write out the List of Figures
\lhead{\emph{List of Tables}} % Set the left side page header to "List of Tables"
\listoftables % Write out the List of Tables
%----------------------------------------------------------------------------------------
% ABBREVIATIONS
%----------------------------------------------------------------------------------------
\clearpage % Start a new page
\setstretch{1.25} % Set the line spacing to 1.5, this makes the following tables easier to read
\lhead{\emph{Abbreviations}} % Set the left side page header to "Abbreviations"
\listofsymbols{ll} % Include a list of Abbreviations (a table of two columns)
{
% \textbf{SM} & \textbf{S}afety \textbf{M}argin\\
\textbf{AFT} & \textbf{A}ccelerated \textbf{F}ailure \textbf{T}ime \\
\textbf{ANOVA} & \textbf{A}nalysis \textbf{}of \textbf{V}ariance\\
\textbf{BLR} & \textbf{B}inary \textbf{L}ogistic \textbf{R}egression\\
}
%----------------------------------------------------------------------------------------
%----------------------------------------------------------------------------------------
% SYMBOLS
%----------------------------------------------------------------------------------------
\clearpage % Start a new page
\lhead{\emph{Symbols}} % Set the left side page header to "Symbols"
\listofnomenclature{lll} % Include a list of Symbols (a two column table)
{
$\mu$ & Location parameter \\
$\lambda$ & Scale parameter \\
$\beta_0$ & Null model parameter \\
$\hat{\beta}$ & Fitted parameter \\
}
%----------------------------------------------------------------------------------------
% THESIS CONTENT - CHAPTERS
%----------------------------------------------------------------------------------------
\mainmatter % Begin numeric (1,2,3...) page numbering
\pagestyle{fancy} % Return the page headers back to the "fancy" style
% Include the chapters of the thesis as separate files from the Chapters folder
% Uncomment the lines as you write the chapters
\input{Chapters/Chapter_1/Chapter1}
\input{Chapters/Chapter_2/Chapter2}
\input{Chapters/Chapter_3/Chapter3}
\input{Chapters/Chapter_4/Chapter4}
\input{Chapters/Chapter_5/Chapter5}
\input{Chapters/Chapter_6/Chapter6}
% \input{Chapters/Chapter7}
\clearpage % Start a new page
%----------------------------------------------------------------------------------------
% THESIS CONTENT - APPENDICES
%----------------------------------------------------------------------------------------
\addtocontents{toc}{\vspace{2em}} % Add a gap in the Contents, for aesthetics
\appendix % Cue to tell LaTeX that the following 'chapters' are Appendices
% Include the appendices of the thesis as separate files from the Appendices folder
% Uncomment the lines as you write the Appendices
\input{Appendices/AppendixA}
\input{Appendices/AppendixB}
% \input{Appendices/AppendixC}
%\input{Appendices/AppendixD}
\addtocontents{toc}{\vspace{2em}} % Add a gap in the Contents, for aesthetics
\backmatter
%----------------------------------------------------------------------------------------
% BIBLIOGRAPHY
%----------------------------------------------------------------------------------------
\label{References}
\lhead{\emph{References}} % Change the page header to say "Bibliography"
%\usepackage{natbib}
%\renewcommand{\refname}{References}
\renewcommand\bibname{References}
\bibliographystyle{elsarticle-harv} % Use the "custom" BibTeX style for formatting the Bibliography
%\setcitestyle{authoryear,open={((},close={))}}
\bibliography{references} % The references (bibliography) information are stored in the file named "Bibliography.bib"
\newpage
\include{LOP}
\newpage
\include{Biography}
\end{document}