This meta-paper describes the style to be used in articles and short papers for SICTI conference, thanks to the creators of the template to SBC Conferences: Rafael H. Bordini e Jomi F. H ̈ubner.
\begin
Discover why over 20 million people worldwide trust Overleaf with their work.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% How to use Overleaf:
%
% You edit the source code here on the left, and the preview on the
% right shows you the result within a few seconds.
%
% Bookmark this page and share the URL with your co-authors. They can
% edit at the same time!
%
% You can upload figures, bibliographies, custom classes and
% styles using the files menu.
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\documentclass[12pt]{article}
\usepackage{sicti-template}
\usepackage{graphicx}
\usepackage[brazil]{babel}
% FOR THOSE PAPERS WRITTEN IN ENGLISH
% \addto\captionsbrazil{%
% \renewcommand\refname{References}
% \renewcommand{\figurename}{Figure}
% \renewcommand{\tablename}{Table}
% \renewcommand{\listfigurename}{List of Figures}
% \renewcommand{\listtablename}{List of Tables}
% \renewcommand{\contentsname}{Contents}
% \renewcommand\chaptername{Chapter}
% }
\usepackage[utf8]{inputenc}
\usepackage{hyperref}
\usepackage[alf]{abntex2cite} % Citações padrão ABNT
\usepackage{fancyhdr}
\pagestyle{fancy}
\fancyhead[L]{ }
\fancyhead[R]{ }
\chead{\begin{picture}(3,3) \put(-230,-15) {\includegraphics[width=16cm, height=2.8cm, keepaspectratio=false]{cabecalho_template.jpg}} \end{picture}}
\renewcommand{\headrulewidth}{0pt}
\sloppy
\begin{document}
\title{\begin{picture}(3,3) \put(-70,30){\includegraphics[width=16cm, height=2.8cm, keepaspectratio=false]{cabecalho_template.jpg}} \end{picture}
Instructions for Authors of SICTI Conference}
\author{Vinicius Ramos\inst{1}, Gertrudes Dandolini\inst{2}, João Artur de Souza\inst{2}}
\address{PPG de Tecnologias da Informação e Comunicação (PPGTIC) \\ Universidade Federal de Santa Catarina
(UFSC)\\
88.900-000 -- Araranguá -- SC -- Brail
\nextinstitute
PPG de Engenharia do Conhecimento (PPGEGC) \\ Universidade Federal de Santa Catarina
(UFSC)\\
88.040-900 -- Florianópolis -- SC -- Brail
\email{\{v.ramos, gertrudes.dandolini\}@ufsc.br, joao.artur@ufsc.br}
}
\maketitle
\begin{abstract}
This meta-paper describes the style to be used in articles and short papers
for SICTI conference, thanks to the creators of the template to SBC Conferences: Rafael H. Bordini e Jomi F. Hübner. For papers in English, you should add just an abstract while for the papers in Portuguese, we also ask for an abstract in
Portuguese (``resumo''). In both cases, abstracts should not have more than 10 lines and must be in the first page of the paper. This conference uses the double-blind review, which means that both the reviewer and author identities are concealed from the reviewers, and vice versa, throughout the review process.
\end{abstract}
\begin{resumo}
Este meta-artigo descreve o estilo a ser usado na confecção de artigos e
resumos de artigos para publicação nos anais do SICTI, obrigado aos criadores do template para as conferências da SBC: Rafael H. Bordini e Jomi F. Hübner. É solicitada a escrita de resumo e abstract apenas para os artigos escritos em português. Artigos em inglês deverão apresentar apenas abstract.
Nos dois casos, o autor deve tomar cuidado para que o resumo (e o abstract)
não ultrapassem 10 linhas cada, sendo que ambos devem estar na primeira
página do artigo. Esta conferência utiliza o processo de double-blind review, ou seja, tanto os revisores quanto os autores não são identificados durante o processo de revisão.
\end{resumo}
\section{General Information}
All full papers submitted to the SICTI conference,
including any supporting documents, should be written in English or in
Portuguese. The format paper should be A4 with single column, 3.5 cm for upper
margin, 2.5 cm for bottom margin and 3.0 cm for lateral margins, without
headers or footers. The main font must be Times New Roman, 12 point nominal size, with 6
points of space before each paragraph. Page numbers must be suppressed.
Full papers must respect the page limits defined by the conference: from 8 to 12 pages, excluding References.
% Conferences that publish just abstracts ask for \textbf{one}-page texts.
\section{First Page} \label{sec:firstpage}
The first page must display the paper title, the name and address of the
authors, the abstract in English and ``resumo'' in Portuguese (``resumos'' are
required only for papers written in Portuguese). The title must be centered
over the whole page, in 16 point boldface font and with 12 points of space
before itself. Author names must be centered in 12 point font, bold, all of
them disposed in the same line, separated by commas and with 12 points of
space after the title. Addresses must be centered in 12 point font, also with
12 points of space after the authors' names. E-mail addresses should be
written using font Courier New, 10 point nominal size, with 6 points of space
before and 6 points of space after.
The abstract and ``resumo'' (if is the case) must be in 12 point Times New Roman font,
indented 0.8cm on both sides. The word \textbf{Abstract} and \textbf{Resumo},
should be written in boldface and must precede the text.
% \section{CD-ROMs and Printed Proceedings}
%In some conferences, the papers are published on CD-ROM while only the
%abstract is published in the printed Proceedings. In this case, authors are
%invited to prepare two final versions of the paper. One, complete, to be
%published on the CD and the other, containing only the first page, with
%abstract and ``resumo'' (for papers in Portuguese).
\section{Sections and Paragraphs}
Section titles must be in boldface, 13pt, flush left. There should be an extra
12 pt of space before each title. Section numbering is optional. The first
paragraph of each section should not be indented, while the first lines of
subsequent paragraphs should be indented by 1.27 cm.
\subsection{Subsections}
The subsection titles must be in boldface, 12pt, flush left.
\section{Figures and Captions}\label{sec:figs}
Figure and table captions should be centered if less than one line
(Figure~\ref{fig:exampleFig1}), otherwise justified and indented by 0.8cm on
both margins, as shown in Figure~\ref{fig:exampleFig2}. The caption font must
be Helvetica, 10 point, boldface, with 6 points of space before and after each
caption.
\begin{figure}[ht]
\centering
\includegraphics[width=.5\textwidth]{fig1.jpg}
\caption{A typical figure}
\label{fig:exampleFig1}
\end{figure}
\begin{figure}[ht]
\centering
\includegraphics[width=.3\textwidth]{fig2.jpg}
\caption{This figure is an example of a figure caption taking more than one
line and justified considering margins mentioned in Section~\ref{sec:figs}.}
\label{fig:exampleFig2}
\end{figure}
In tables, try to avoid the use of colored or shaded backgrounds, and avoid
thick, doubled, or unnecessary framing lines. The best way is to use horizontal lines at the table header and at the end of the table. When reporting empirical data,
do not use more decimal digits than warranted by their precision and
reproducibility. Table caption must be placed before the table (see Table 1)
and the font used must also be Helvetica, 10 point, boldface, with 6 points of
space before and after each caption.
\begin{table}[ht]
\centering
\caption{Variables to be considered on the evaluation of interaction
techniques}
\label{tab:exTable1}
\begin{tabular}{clrcr}
\hline
\textbf{Número} & \multicolumn{1}{c}{\textbf{Dia}} & \multicolumn{1}{c}{\textbf{Valor}} & \textbf{Quantidade} & \multicolumn{1}{c}{\textbf{Total}} \\ \hline
1 & Domingo & R\$ 1,00 & 4 & R\$ 4,00 \\
2 & Segunda & R\$ 2,00 & 3 & R\$ 6,00 \\
3 & Terça & R\$ 3,00 & 5 & R\$ 15,00 \\ \hline
\end{tabular}
%\includegraphics[width=.7\textwidth]{table.jpg}
\end{table}
\section{Images}
All images and illustrations should be in black-and-white, or gray tones, but it is acceptable colored images when it is extremely necessary. The image resolution on paper should be about 600 dpi for black-and-white images, and 150-300 dpi for grayscale images. Do not include
images with excessive resolution, as they may take hours to print, without any
visible difference in the result.
\section{References}
Bibliographic references must be unambiguous and uniform. We recommend giving
the author names references in parenthesis, e.g. \cite{knuth:84},
\cite{boulic:91}, and \cite{smith:99}; or dates in parentheses, e.g. Knuth (\citeyear{knuth:84}), Smiths e Jones (\citeyear{smith:99}).
The references must be listed using 12 point font size, with 6 points of space
before each reference. The references must be formatted in \href{https://www.normasabnt.org/referencias-abnt/}{ABNT} (\url{https://www.normasabnt.org/referencias-abnt/}).
%The first line of each reference should not be indented, while the subsequent should be indented by 0.5 cm.
%\setlength{\biblabelsep}{4\labelsep}
%\setlength\bibhang{12pt}
%\setlength{\bibsep}{1\baselineskip}
\bibliographystyle{abntex2-alf}
\bibliography{sicti-template}
\end{document}