Uppsala University Thesis Template
Author
A student who wants to help out
Last Updated
před 4 měsíci
License
Creative Commons CC BY 4.0
Abstract
A template that can be used for a thesis at the Faculty of Science and Technology, Uppsala University.
% Author: A student who wants to help out
% Inspiration from:
% https://github.com/independent-project-in-it-uu-2021/rapport-mall
% https://www.overleaf.com/latex/templates/mall-kandidatarbete-i-teknisk-fysik-uppsala-universitet/hcvpscsrypvt
% MUST use a4paper option
% MAY use twoside, smaller font, and other class
\documentclass[a4paper,12pt]{article}
% Use UTF-8 encoding in input files
\usepackage[utf8]{inputenc}
\usepackage{svg}
\usepackage{caption}
\usepackage{subcaption}
\usepackage{varioref}
\usepackage{csquotes}
% Om ni skriver på svenska, använd denna rad:
% \usepackage[english,swedish]{babel}
% If you are writing in English, use the following line INSTEAD of the previous (note order of parameters):
\usepackage[swedish,english]{babel}
% Use the template for thesis reports
\usepackage{UppsalaExjobb}
% Uncomment the line below to use the todonotes package. A todo note is written using the command \todo{text here}
%\usepackage[colorinlistoftodos,prependcaption,textsize=tiny]{todonotes}
% Designval: per default används styckesindrag, men ibland blir det snyggare/mer lättläst med tomrad mellan stycken. Det åstadkoms av de följande raderna.
% Tycker ni om styckesindrag mera, kommentera bort nästa två rader.
\parskip=0.8em
\parindent=0mm
% Designval: vill ni ha en box runt figurer istället för strecken som är default, av-kommentera raden nedan. Obs att både \floatstyle och \restylefloat behövs.
%\floatstyle{boxed} \restylefloat{figure}
%Hänvisar till tex filen acronyms
\input{acronyms}
\begin{document}
% För att ställa in parametrar till IEEEtranS/IEEEtranSA behöver detta ligga här (före första \cite).
% Se se IEEEtran/bibtex/IEEEtran_bst_HOWTO.pdf, avsnitt VII, eller sista biten av IEEEtran/bibtex/IEEEexample.bib.
%%%% OBS: här ställer ni t.ex. in hur URLer ska beskrivas.
\bstctlcite{rapport:BSTcontrol}
% Somehow other solutions for date does not work
\renewcommand{\today}{\ifcase \month \or January\or February\or March\or %
April\or May \or June\or July\or August\or September\or October\or November\or %
December\fi, \number \year}
\date{\today}
%%%%%%%%
% Set title
\title{Your Fancy Title}
% Use this if you have a subtitle
\subtitle{Subtitle?}
% Serial number UPTEC XX XXXXX
\serialnumber{UPTEC XX XXXXX}
%Number of credits
\credits{X}
% Your progamme
\program{Master's Programme in X}
% Set author names, separated by "\\ " (don't forget the space, or use newline) and list authors alphabetically by LAST NAME (unless someone did significantly more/less, which should not be the case)
\author{First name Last name}
% Internal or external supervisor
\supervisor{X}
% Internal reviewer
\reviewer{Y}
% Examiner
\examinator{Z}
% If confidential: This degree project is confidential until [Date]
\secrecy{}
% This creates the title page
\maketitle
% Change to frontmatter style (e.g. roman page numbers)
\frontmatter
\blankpage
\begin{abstract}
\input{text/abstract}
\end{abstract}
\blankpage
\begin{sammanfattning}
\input{text/summary}
\end{sammanfattning}
\paragraph{Acknowledgement}
\input{text/acknowledgement}
\newpage
% Innehållsförteckningen här.
\tableofcontents
% Här kan man också ha \listoffigures, \listoftables
\clearpage
%\printglossary[type=\acronymtype]
\printglossary[title=Acronyms, toctitle=Acronyms]
\cleardoublepage
% Change to main matter style (arabic page numbers, reset page numbers)
\mainmatter
% Here comes the text of the report. You can add your own chapters
\paragraph{NOTE:} The order and types of chapters/sections provided are just examples. You should decide on the best chapters and order for your work.
\section{Introduction}
\label{sec:introduction}
\input{text/introduction}
\section{Purpose, Aims and Motivation}
\label{sec:purpose}
\input{text/purpose}
\section{Background}
\label{sec:background}
\input{text/background}
\section{Method}
\label{sec:method}
\input{text/method}
\section{Results and Discussion}
\label{sec:result_discussion}
\input{text/result_discussion}
\section{Conclusions}
\label{sec:conclusions}
\input{text/conclusions}
%%%% References
\newpage
% Use one of these:
% IEEEtranS gives numbered references like [42] sorted by author,
% IEEEtranSA gives ``alpha''-style references like [Lam81] (also sorted by author)
\bibliographystyle{IEEEtranS}
%\bibliographystyle{IEEEtranSA}
% Here comes the bibliography/references.
% För att göra inställningar för IEEEtranS/SA kan man använda ett speciellt bibtex-entry @IEEEtranBSTCTL,
% se IEEEtran/bibtex/IEEEtran_bst_HOWTO.pdf, avsnitt VII, eller sista biten av IEEEtran/bibtex/IEEEexample.bib.
\bibliography{./dependencies/bibconfig,refs.bib}
%\bibliography{refs.bib}
\newpage
%%%% Appendix
\appendix
\input{text/appendix}
\end{document}